Fine Art Resin 180 gr - 2-komponentig

Niet op voorraad
Artikelnummer
800194900
€ 12,95
Spaarpunten You will earn 2 Punten for purchasing this product.

Voor 15:00 uur besteld, dezelfde dag verzonden

Mail ons voor meer informatie: info@hobbycompleetdeduif.nl

Probleemloos retourneren binnen 60 dagen

Spaar punten bij aankoop van dit product!

 

 

PRODUCT INFORMATION FINE ART RESIN 1,5 KG, 2 COMPONENTS
Fine Art Resin is a two-component, solvent-free, colorless epoxy casting resin system. It is very fluid for the finest contours, self-deaerating (depending on the shape). Fine Art Resin cures crystal clear and high gloss and is temperature resistant up to 70 °C.

HANDLING:
Use the mixing ratio (parts by weight) of 2 parts resin (A) and 1 part curing agent (B), e.g., 100 g resin (component A) and 50 g curing agent (component B), and thoroughly mix (i.e., without streaks, approx. 3 min.) in a clean container.

During processing of the resin, components A and B become a clear, hard plastic. During this process heat is generated, i.e. the maximum casting height per working cycle should not be exceeded!

It should also be noted that mixed residues should not simply be left in the mixing vessel (high heat development) - but poured out if necessary.

Mixing ratio (parts by weight): A : B  2 : 1
Processing time (at 20° C): Approx. 60 min.
Max. casting height per casting process: Approx. 1 cm If thicker layers are desired, they must be cast in several process steps.
Curing time (at 20° C): Removable from the mold after approx. 24 - 36 hours - depending on the layer thickness;
Through hardened (at 20° C): after 7 days. Lower temperatures extend processing and curing times, high temperatures shorten them.

  • cures crystal clear, high gloss
  • good UV stability
  • temperature resistant up to 70 °C

CONTENT:
1 x Resin Component A 1.000 g – Resin
1 x Resin Component B 500 g – Curing Agent

WARNING ACCORDING RESIN COMPONENT A – RESINMay cause an allergic skin reaction. Harmful to aquatic life with long lasting effects. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing vapours or spray. Wear protective gloves / eye protection / face protection. IF ON SKIN: Wash with plenty of water / soap. Get medical advice / attention if you feel unwell. Dispose of contents / container to an approved waste disposal facility.

WARNING ACCORDING COMPONENT B – CURING AGENT
Harmful if swallowed. Causes severe skin burns and eye damage. May cause an allergic skin reaction. Harmful toaquatic life with long lasting effects. If medical advice is needed, have product container or label at hand. Keep out ofreach of children. Do not breathe vapours or spray. Wear protective gloves / protective clothing / eye protection / faceprotection. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately allcontaminated clothing. Rinse skin with water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER / doctor. Store lockedup. Dispose of contents / container to an approved waste disposal facility.

Meer informatie
Artikelnummer 800194900
Barcode 4042972163945
Schrijf uw eigen review
U plaatst een review over:Fine Art Resin 180 gr - 2-komponentig
Uw waardering